Users Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information
The following describes the interface command shown in the following example. This example sets a port as
hybrid, makes the port a tagged member of VLAN 20, and an untagged member of VLAN 10, which becomes the
native VLAN of the port. The port now accepts:
• untagged frames and classify them as VLAN 10 frames
• VLAN 20 tagged frames
The following describes the do show interfaces command shown in the following example. This example
shows output with “Hybrid” as the newly added value for 802.1QTagged. The options for this eld are:
• True — port is tagged
• False — port is untagged
• Hybrid — port accepts both tagged and untagged frames
The following describes the interface vlan command shown in the following example. This example shows
unconguration of the hybrid port using the no portmode hybrid command.
NOTE: Remove all other congurations on the port before you can remove the hybrid conguration
from the port.
Example
Dell(conf)# interface gigabitethernet 1/1
Dell(conf-if-gi-1/1)# portmode hybrid
Dell(conf-if-gi-1/1)# interface vlan 10
Dell(conf-if-vl-10)# untagged gigabitethernet 1/1
Dell(conf-if-vl-10)# interface vlan 20
Dell(conf-if-vl-20)# tagged gigabitethernet 1/1
Dell(conf-if-vl-20)#
Example
Dell(conf-if-vl-20)# do show interfaces switchport
Name: GigabitEthernet 1/1
802.1QTagged: Hybrid
Vlan membership:
Vlan 10, Vlan 20
Native VlanId: 10
Dell(conf-if-vl-20)#
Example (Vlan)
Dell(conf-if-vl-20)# interface vlan 10
Dell(conf-if-vl-10)# no untagged gigabitethernet 1/1
Dell(conf-if-vl-10)# interface vlan 20
Dell(conf-if-vl-20)# no tagged gigabitethernet 1/1
Dell(conf-if-vl-20)# interface gigabitethernet 1/1
Dell(conf-if-gi-1/1)# no portmode hybrid
Dell(conf-if-vl-20)#
Interfaces 629