Users Guide

• For non-ON platforms, you can specify multiple ports as slot/port-range. For
example, if you want to clear the port congurations corresponding to all ports
between 1 and 4, specify the port range as show interfaces interface-
type
1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/port/[subport] -
slot/port/[subport]. For example, if you want to clear the port congurations
corresponding to all ports between 1 and 4, specify the port range as show
interfaces interface-type 1/1/1 - 1/1/4.
vrrp [ipv6 {vr-id} |
vr-id]
(OPTIONAL) Enter the keyword vrrp to clear the counters of all VRRP groups. To clear
the counters of VRRP groups on all IPv6 interfaces, enter ipv6. To clear the counters of
a specied group, enter a VRID number from 1 to 255.
learning-limit (OPTIONAL) Enter the keywords learning-limit to clear unknown source address
(SA) drop counters when MAC learning limit is congured on the interface.
vlan vlan-id Enter the keyword vlan followed by the interface VLAN number. The range is from 1 to
4094.
Defaults Without an interface specied, the command clears all interface counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.9(0.0) Added support to clear the interface congurations corresponding to a range of ports.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.4.1.0 Added support (E-Series only) for VRRP groups in a VRF instance.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added support for 4093 VLANs on the E-Series. Prior to the release, 2094 was
supported.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.5.1.0 Updated the denition of the learning-limit option for clarity.
602 Interfaces