Users Guide

http: Enter the keyword http: to copy from the remote le system, IPv4, or IPv6, (http://
hostip/filepath) .
nfsmount: Enter the keyword nfsmount: to copy from the nfs mount le system (nfsmount://
<mount-point>/filepath).
running-cong Enter the keywords running-config to copy from the current system conguration.
scp: Enter the keyword scp: to copy from the remote le system, IPv4, or IPv6, (scp://
userid:password@hostip/filepath).
startup-cong Enter the keywords startup-config to copy from the startup conguration.
tftp: Enter the keyword tftp: to copy from the remote le system, IPv4, or IPv6, (tftp://
hostip/filepath).
usbash: Enter the keyword usbflash: to copy the le to or from the external USB ash.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON. Added the nfsmount:<mount-point> parameters
that allow you to mount a remote NFS le system.
9.4(0.0) Added the compressed-cong parameter.
9.3(0.1) Added the http parameter on the S6000, Z9000, S4810, and S4820T.
9.0.2.0 Introduced on the S6000.
8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added usbflash and rpm0usbflash commands on E-Series.
7.6.1.0 Introduced on the S-Series and added the SSH port number to the SCP prompt
sequence on all systems.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information Dell Networking OS supports a maximum of 100 les at the root directory level on both the internal and external
ash.
When copying a le to a remote location (for example, using Secure Copy [SCP]), enter only the keywords and Dell
Networking OS prompts you for the rest of the information. For example, when using SCP, you can enter copy
running-config scp: where running-config is the source and the target is specied in the ensuing
prompts. Dell Networking OS prompts you to enter any required information for the named destination — remote
destination, destination lename, user ID, password, and so forth.
File Management 59