Users Guide
show frrp
Display the resilient ring protocol conguration.
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
ring-id Enter the ring identication number. The range is from 1 to 255
summary (OPTIONAL) Enter the keyword summary to view just a summarized version of the Ring
conguration.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series.
7.4.1.0 Introduced.
Usage Information Executing this command without the optional ring-id command clears the statistics counters on all the available
rings. Dell Networking OS requires a command line conrmation before the command executes. This command
clears the following counters:
• hello Rx and Tx counters
• Topology change Rx and Tx counters
• The number of state change counters
Usage Information Executing this command without the optional ring-id command clears the statistics counters on all the available
rings. Dell Networking OS requires a command line conrmation before the command is executed. This command
clears the following counters:
• hello Rx and Tx counters
546 Force10 Resilient Ring Protocol (FRRP)