Users Guide

no prepend Species that local AS values do not prepend to announcements from the neighbor.
Defaults Not congured.
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
If a local-as is congured, BGP does not allow for the conguration of BGP confederation. Similarly, if BGP
confederation is congured, then BGP does not allow the conguration of local-as.
This command automatically restarts the neighbor session for the conguration to take eect.
Related Commands
• bgp four-octet-as-support — enable 4-byte support for the BGP process.
neighbor maximum-prex
Control the number of network prexes received.
Syntax
neighbor {ip-address | peer-group-name} maximum-prefix maximum [threshold]
[warning-only]
To return to the default values, use the no neighbor {ip-address | peer-group-name} maximum-
prefix maximum command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
maximum Enter a number as the maximum number of prexes allowed for this BGP router. The
range is from 1 to 4294967295.
threshold (OPTIONAL) Enter a number to be used as a percentage of the maximum value. When
the number of prexes reaches this percentage of the maximum value, the E-Series
software sends a message. The range is from 1 to 100 percent. The default is 75.
372 Border Gateway Protocol