Users Guide

brief (OPTIONAL) Enter the keyword brief to view a table of information on the VRRP
groups.
vrf vrf-name Enter the keyword vrf then the name of the VRF to view IPv6 VRRP groups
corresponding to that VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.3.2.0 Introduced on the E-Series.
Usage Information The following describes the show vrrp ipv6 command.
Line starting
with
Description
GigabitEthernet... Displays the interface, VRRP group ID, and network address. If the interface is not
sending VRRP packets, 0.0.0.0 appears as the network IP address.
VRF VRF instance to which the VRRP group interface belongs.
State: master... Displays the interface’s state:
• Na/If (not available)
• master (MASTER virtual router)
• backup (BACKUP virtual router)
Also displays the interface’s priority and IP address of the MASTER.
Hold Down:... Displays additional VRRP conguration information:
• Hold Down displays the hold down timer interval in seconds.
• Preempt displays TRUE if preempt is congured and FALSE if preempt is not
congured.
• AdvInt displays the Advertise Interval in seconds.
Adv rcvd:... Displays counters for the following:
• Adv rcvd displays the number of VRRP advertisements received on the interface.
• Adv sent displays the number of VRRP advertisements sent on the interface.
• Bad pkts rcvd displays the number of invalid packets received on the interface.
Virtual Router Redundancy Protocol (VRRP) 1613