Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1511

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.11.1 Introduced on the Z9000.

8.5.1.0 Added support for 4-port 40G line cards.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.1.1.0 Introduced on the E-Series.

ntp trusted-key

Set a key to authenticate the system to which NTP synchronizes.

Syntax

ntp trusted-key number

To delete the key, use the no ntp trusted-key number command.

Parameters

number Enter a number as the trusted key ID. The range is from 1 to 4294967295.

Defaults Not congured.