Users Guide

ip ssh hostbased-authentication
Enable hostbased-authentication for the SSHv2 server.
Syntax
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the no ip ssh hostbased-authentication
enable command.
Parameters
enable Enter the keyword enable to enable hostbased-authentication for SSHv2 server.
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
If you enable this command, clients can log in without a password prompt. This command provides two levels of
authentication:
• rhost-authentication is done with the le specied in the ip ssh rhostfile command.
• checking client host-keys is done with the le specied in the ip ssh pub-key-file command.
NOTE: Administrators must specify the two les (rhosts and pub-key-file) to congure host-
based authentication.
Related Commands
• ip ssh pub-key-le — public keys of trusted hosts from a le.
• ip ssh rhostsle — trusted hosts and users for rhost authentication.
Security 1351