Users Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information This command species the maximum number of attempts to authenticate a user on an SSH connection with the
remote host for password authentication. SSH disconnects when the number of password failures exceeds
authentication-retries.
ip ssh cipher
Congure the list of ciphers supported on both SSH client and SCP.
Syntax
ip ssh cipher cipher-list
Parameters
cipher cipher-list Enter the keyword cipher and then a space-delimited list of ciphers that the SSH client
supports. The following ciphers are available.
• aes256-ctr
• aes256-cbc
• aes192-ctr
• aes192-cbc
• aes128-ctr
• aes128-cbc
• 3des-cbc
Defaults The default list of ciphers is in the order as shown below:
• aes256-ctr
• aes256-cbc
• aes192-ctr
• aes192-cbc
• aes128-ctr
• aes128-cbc
• 3des-cbc
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Security 1349