Users Guide

TACACS+ Commands
Dell Networking OS supports TACACS+ as an alternate method for login authentication.
tacacs-server group
Creates a group of TACACS servers to be used for Authentication, Authorization, and Accounting..
Syntax
aaa tacacsgroup group-name
To delete a group of TACACS servers, use the no tacacs-server group group-name command
.
Parameters
group-name Enter the name of the TACACS server group.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information If the TACACS group is not congured for Authentication, Authorization, and Accounting, then globally congured
TACACS servers are used for the purposes. When the TACACS group is removed, the AAA conguration is also
removed.
Example
Dell(conf)# tacacs-server group group1
Dell(conf-tacacs-group)# tacacs-server host 1.1.1.1 key secret
Dell(conf-tacacs-group)# tacacs-server host 2.2.2.2 key secret
Dell(conf-tacacs-group)# tacacs-server vrf vrf1 source-interface
gigabitethernet 1/40
Dell(conf)# exit
Dell(conf)# aaa tacacsgroup group1
Related Commands
• aaa authentication login — species the login authentication method.
• tacacs-server key — congures a TACACS+ key for the TACACS server.
1326 Security