Users Guide

Authentication and Password Commands
To manage access to the system, use the following the commands.
aaa authentication enable
Congure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
Syntax
aaa authentication enable {default | method-list-name} method [... method2]
To return to the default setting, use the no aaa authentication enable {default | method-list-
name} method [... method2] command.
Parameters
default Enter the keyword default then the authentication methods to use as the default
sequence of methods for the Enable login. The default is default enable.
method-list-name Enter a text string (up to 16 characters long) to name the list of enabled authentication
methods activated at login.
method Enter one of the following methods:
• enable: use the password the enable password command denes in
CONFIGURATION mode.
• line: use the password the password command denes in LINE mode.
•
none: no authentication.
• radius: use the RADIUS servers congured with the radius-server host
command.
• tacacs+: use the TACACS+ server(s) congured with the tacacs-server host
command.
... method2 (OPTIONAL) In the event of a “no response” from the rst method, Dell Networking OS
applies the next congured method.
Defaults Use the enable password.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
1300 Security