Users Guide

To remove the RADIUS group conguration, use the no aaa radius group group-name command.
Parameters
group-name Enter the name of the RADIUS server group.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information
You can use this command to congure the group of Radius servers used for Authentication, Authorization, and
Accounting purposes.
If the RADIUS group is not congured for Authentication, Authorization, and Accounting, then globally congured
Radius servers are used for the purposes.
When the RADIUS group is removed, the AAA conguration is also removed.
Example
Dell(conf)# radius-server group group1
Dell(conf-radius-group)# radius-server host 1.1.1.1 key secret
Dell(conf-radius-group)# radius-server host 2.2.2.2 key secret
Dell(conf-radius-group)# radius-server vrf vrf1 source-interface
gigabitethernet 1/36
Dell(conf)# exit
Dell(conf)# aaa radius group group1
show accounting
Display the active accounting sessions for each online user.
Syntax
show accounting
Defaults none
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
1292 Security