Users Guide
• switchport mode private-vlan — sets PVLAN mode of the selected port.
private-vlan mode
Set PVLAN mode of the selected VLAN to community, isolated, or primary.
S3048
Syntax
[no] private-vlan mode {community | isolated | primary}
To remove the PVLAN conguration, use the no private-vlan mode {community | isolated |
primary} command syntax.
Parameters
community Enter the keyword community to set the VLAN as a community VLAN.
isolated Enter the keyword isolated to congure the VLAN as an isolated VLAN.
primary Enter the keyword primary to congure the VLAN as a primary VLAN.
Defaults none
Command Modes INTERFACE VLAN
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information The VLAN:
• can be in only one mode, either community, isolated, or primary.
• mode to community or isolated even before associating it to a primary VLAN. This secondary VLAN
continues to work normally as a normal VLAN even though it is not associated to a primary VLAN. (A syslog
message indicates this.)
• must not have a port in it when VLAN mode is being set.
Only ports (and port channels) congured as promiscuous, host, or PVLAN trunk ports (as previously described)
can be added to the PVLAN. No other regular ports can be added to the PVLAN.
1158 Private VLAN (PVLAN)