Users Guide

show ip pim summary
View information about PIM-SM operation.
S3048–ON
Syntax
show ip pim [vrf vrf-name] summary
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to congure this
setting on that VRF.
NOTE: Applies to specic VRF if input is provided, else applies to Default
VRF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.1.1 Support for the display of PIM-SM snooping status was added on E-Series.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the S-Series.
Example
Dell# show ip pim summary
PIM TIB version 495
Uptime 22:44:52
Entries in PIM-TIB/MFC : 2/2
Active Modes :
PIM-SNOOPING
Interface summary:
1 active PIM interface
0 passive PIM interfaces
3 active PIM neighbors
TIB summary:
1/1 (*,G) entries in PIM-TIB/MFC
1/1 (S,G) entries in PIM-TIB/MFC
PIM-Sparse Mode (PIM-SM) 1143