Users Guide

Parameters
area area-id
Area for which OSPFv3 trac is to be encrypted. For area-id, enter a number.
The range is from 0 to 4294967295.
ipsec spi number
Security Policy index (SPI) value that identies an IPsec security policy.
The range is from 256 to 4294967295.
esp encryption-
algorithm
Encryption algorithm used with ESP.
Valid values are: 3DES, DES, AES-CBC, and NULL.
For AES-CBC, only the AES-128 and AES-192 ciphers are supported.
key-encryption-
algorithm
(OPTIONAL) Species if the key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
key
Text string used in encryption.
The required lengths of a non-encrypted or encrypted key are:
3DES - 48 or 96 hex digits; DES - 16 or 32 hex digits; AES-CBC -32 or 64 hex digits for
AES-128 and 48 or 96 hex digits for AES-192.
authentication-
algorithm
Species the authentication algorithm to use for encryption.
Valid values are MD5 or SHA1.
key-encryption-
type
(OPTIONAL) Species if the authentication key is encrypted.
Valid values: 0 (key is not encrypted) or 7 (key is encrypted).
key
Text string used in authentication.
For MD5 authentication, the key must be 32 hex digits (non-encrypted) or 64 hex digits
(encrypted).
For SHA-1 authentication, the key must be 40 hex digits (non-encrypted) or 80 hex digits
(encrypted).
null
Causes an encryption policy congured for the area to not be inherited on the interface.
Defaults Not congured.
Command Modes ROUTER OSPFv3
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
1076 Open Shortest Path First (OSPFv2 and OSPFv3)