Users Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Related Commands
• show ip ospf asbr — display the VLAN conguration.
distance
Dene an administrative distance for particular routes to a specic IP address.
S3048–ON
Syntax
distance weight [ip-address mask access-list-name]
To delete the settings, use the no distance weight [ip-address mask access-list-name]
command.
Parameters
weight Specify an administrative distance. The range is from 1 to 255. The default is 110.
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format. If you enter a router ID,
include the mask for that router address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n format.
access-list-name (OPTIONAL) Enter the name of an IP standard access list, up to 140 characters.
Defaults 110
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
Open Shortest Path First (OSPFv2 and OSPFv3) 1011