Service Manual

Ouput Description
Last Change Time since the last change in the state of the tracked object.
Example (Brief)
Dell#show track ipv6 route brief
ResId Resource Parameter State LastChange
2 IPv6 route metric threshold 2040::/64 Up 00:02:36
3 IPv6 route reachability 2050::/64 Up 00:02:36
Related Commands
• show running-cong track – displays conguration information about tracked objects.
• show track – displays information about tracked objects, including conguration, current state, and
clients which track the object.
• track interface ipv6 routing – congures object tracking on the routing status of an IPv6 Layer 3
interface.
• track ipv6 route metric threshold – congures object tracking on the threshold of an IPv6 route metric.
• track ipv6 route reachability – congures object tracking on the reachability of an IPv6 route.
track interface ipv6 routing
Congure object tracking on the routing status of an IPv6 Layer 3 interface.
Syntax
track object-id interface interface ipv6 routing
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. The range is 1 to 500.
interface Enter one of the following values:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a Loopback interface, enter the keyword loopback then a number from 0
to 16383.
• For a port channel interface, enter the keywords port-channel then a
number.
• For a tunnel interface, enter the keyword tunnel.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
980
Object Tracking