Service Manual

• EXEC Privilege
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Information The following describes the show track ipv6 route command shown in the Example below.
Output Description
Track object-id Displays the number of the tracked object.
Interface type slot/
port, IP route ip-
address, IPv6 route
ipv6-address
Displays the interface type and slot/port number or address of the IPv4/IPv6 route
that is being tracked.
object is Up/Down Up/Down state of tracked object; for example, IPv4 interface, reachability or
metric threshold of an IP route.
number changes,
last change time
Number of times that the state of the tracked object has changed and the time
since the last change in hours:minutes:seconds.
First hop interface Displays the type and slot/port number of the rst-hop interface of the tracked
route.
Tracked by Client that is tracking an object’s state; for example, VRRP.
Example
Dell#show track ipv6 route
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:30
Metric threshold down 255 up 254
First-hop interface is GigabitEthernet 1/2
Tracked by:
VRRP GigabitEthernet 2/4 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:30
First-hop interface is GigabitEthernet 1/2
Tracked by:
VRRP GigabitEthernet 2/4 IPv6 VRID 1
Usage Command The following describes the show track ipv6 route brief command shown in the Example below.
Ouput Description
ResID Number of the tracked object.
Resource Type of tracked object.
Parameter Detailed description of the tracked object.
State Up or Down state of the tracked object.
Object Tracking
979