Service Manual

description
Enter a description of a tracked object.
Syntax
description {text}
To remove the description, use the no description {text} command.
Parameters
text Enter a description to identify a tracked object (80 characters maximum).
Defaults none
Command Modes OBJECT TRACKING (conf_track_object-id)
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Related Commands
• track interface ip routing – congures object tracking on the routing status of an IPv4 Layer 3 interface.
• track interface line-protocol – congures object tracking on the line-protocol state of a Layer 2 interface.
• track ip route metric threshold – congures object tracking on the threshold of an IPv4 route metric.
• track ip route reachability – congures object tracking on the reachability of an IPv4 route.
show running-cong track
Display the current conguration of tracked objects.
Syntax
show running-config track [object-id]
Parameters
object-id (OPTIONAL) Display information on the specied tracked object. The range is 1 to
500.
Command Modes EXEC Privilege
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Example
Dell#show running-config track
track 1 ip route 23.0.0.0/8 reachability
track 2 ipv6 route 2040::/64 metric threshold
delay down 3
delay up 5
Object Tracking
969