Service Manual
distance (OPTIONAL) Enter a number as the distance metric assigned to the mroute. The
range is from 0 to 255.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
E-Series legacy
command
Related Commands show ip mroute — displays the routing table.
ip multicast-limit
To limit the number of multicast entries on the system, use this feature.
Syntax
ip multicast-limit [vrf vrf-name] limit
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to limit the
number of multicast on the VRF.
limit Enter the desired maximum number of multicast entries on the system. The S-
Series range is from 1 to 16000.
Defaults The S-Series default is 4000.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
946
Multicast