Service Manual

Defaults Not congured.

Command Modes CONFIGURATION

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

6.2.1.1 Introduced

ip msdp mesh-group

To be a member of a mesh group, congure a peer.

Syntax

ip msdp mesh-group {name} {peer address}

To remove the peer from a mesh group, use the no ip msdp mesh-group {name} {peer

address} command.

Parameters

name Enter a string of up to 16 characters long for as the mesh group name.

peer address Enter the peer address in a dotted decimal format (A.B.C.D.).