Service Manual

Version Description
pre-6.2.1.1 Introduced on the E-Series.
Usage Information To display information about a named VLAN, enter the show vlan command with the name parameter or
the show interfaces description command.
Related Commands
interface vlan — congures a VLAN.
show vlan — displays the current VLAN congurations on the switch.
show cong
Display the current conguration of the selected VLAN.
Syntax
show config
Command Modes INTERFACE VLAN
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Example
Dell(conf-if-vl-100)#show config
!
interface Vlan 100
no ip address
no shutdown
Dell(conf-if-vl-100)#
show vlan
Display the current VLAN congurations on the switch.
Syntax
show vlan [brief | id vlan-id | name vlan-name]
872
Layer 2