Service Manual

Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Added the vlan option on the E-Series.
7.7.1.0 Introduced on the C-Series and S-Series.
pre-6.2.1.1 Introduced on the E-Series.
Example
Dell#show mac-address-table aging-time
Mac-address-table aging time : 1800
Dell#
Related Commands show mac-address-table — displays the current MAC address conguration.
show mac accounting destination
Display destination counters for Layer 2 trac (available on physical interfaces only).
Syntax
show mac accounting destination [mac-address vlan vlan-id] [interface
interface [mac-address vlan vlan-id] [vlan vlan-id]] [vlan vlan-id]
Parameters
mac-address (OPTIONAL) Enter the MAC address in the nn:nn:nn:nn:nn:nn format to display
information on that MAC address.
interface interface (OPTIONAL) Enter the keyword interface then the interface type, slot and port
information:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC
address assigned to the VLAN. The range is from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Layer 2
867