Service Manual

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.2.1.0 Introduced the keyword keyboard-interactive.

8.1.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command

Usage Information After entering the banner login command, type one or more spaces and a delineator character. Enter the

banner text then the second delineator character. When the user is connected to the router, if a message of

the day banner is congured, it displays rst. If no message of the day banner is congured, the login banner

and prompt appear. After the user has logged in, the banner EXEC (if congured) displays.

Example

Dell(conf)#banner login ?

keyboard-interactive Press enter key to get prompt

LINE c banner-text c, where 'c' is a delimiting character

Dell(conf)#no banner login ?

keyboard-interactive Prompt will be displayed by default

<cr>

Dell(conf)#banner login keyboard-interactive

Enter TEXT message. End with the character '%'.

This is the banner%

Dell(conf)#end

Dell#exit

13d21h9m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user on

line console

This is the banner

Dell con0 now available

Press RETURN to get started.

13d21h10m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on

line console

This is the banner

Dell>

Related Commands

banner motd — sets a Message of the Day banner.

banner exec — enables the display of a text string when you enter EXEC mode.

Control and Monitoring