Service Manual

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
Because the default establishes Level 1 and Level 2 adjacencies, you do not need to congure this command.
Routers in an IS-IS system must be congured as a Level 1-only, Level 1-2, or Level 2-only system.
Only congure interfaces as Level 1 or Level 2 on routers that are between areas (for example, a Level 1-2
router) to prevent the software from sending unused hello packets and wasting bandwidth.
isis csnp-interval
Congure the IS-IS complete sequence number PDU (CSNP) interval on an interface.
Syntax
isis csnp-interval seconds [level-1 | level-2]
To return to the default values, use the no isis csnp-interval [seconds] [level-1 |
level-2] command.
Parameters
seconds Interval of transmission time between CSNPs on multi-access networks for the
designated intermediate system. The range is from 0 to 65535. The default is 10.
level-1 (OPTIONAL) Independently congures the interval of time between transmission
of CSNPs for Level 1.
level-2 (OPTIONAL) Independently congures the interval of time between transmission
of CSNPs for Level 2.
Defaults seconds = 10; level-1 (if not otherwise specied)
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Intermediate System to Intermediate System (IS-IS)
809