Service Manual

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.5.1.0 Introduced.
Usage Information To assign a network entity title to enable IS-IS, use the net command.
This command accepts even if an IP address is not congured. This command is cached in the L3 Manager
till the IP address is congured. When the IP address conguration reaches the L3Manager, the circuit add
message is sent to IS-IS.
NOTE: IP address is not mandatory for forming IS-IS adjacency.
Related Commands
• net — congures an IS-IS network entity title (NET) for the routing process.
• router isis — enables the IS-IS routing protocol.
ipv6 router isis
Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.
Syntax
ipv6 router isis [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
tag (OPTIONAL) This parameter is a unique name for a routing process. A null tag is
assumed if the tag option is not specied. The tag name must be unique for all IP
router processes for a given router.
Defaults Not congured.
Command Modes ROUTER ISIS
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
Intermediate System to Intermediate System (IS-IS)
807