Service Manual

graceful-restart t2
Congure the wait time for the graceful restart timer T2 that a restarting router uses as the wait time for each database to
synchronize.
Syntax
graceful-restart t2 {level-1 | level-2} seconds
To return to the default, use the no graceful-restart t2 command.
Parameters
level-1, level-2 Enter the keywords level-1 or level-2 to identify the database instance type
to which the wait interval applies.
seconds Enter the gracefule-restart t2 time in seconds. The range is from 5 to 120
seconds. The default is 30 seconds.
Defaults 30 seconds
Command Modes ROUTER ISIS
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Introduced on the E-Series.
graceful-restart t3
Congure the overall wait time before graceful restart completes.
Syntax
graceful-restart t3 {adjacency | manual} seconds
To return to the default, use the no graceful-restart t3 command.
Parameters
adjacency Enter the keyword adjacency so that the restarting router receives the
remaining time value from its peer and adjusts its T3 value so if you have
congured this option.
manual Enter the keyword manual to specify a time value that the restarting router uses.
The range is from 50 to 120 seconds. The default is 30 seconds.
Defaults manual, 30 seconds
Intermediate System to Intermediate System (IS-IS)
803