Service Manual
Version Description
8.3.11.1 Introduced on the Z9000.
Usage Information To congure a shortcut name that you can use instead of entering a long string of numbers associated with
an NSAP address, use this command.
Related Commands hostname dynamic — enables dynamic learning of host names from routers in the domain and allows the
routers to advertise the host names in LSPs.
debug isis
Enable debugging for all IS-IS operations.
Syntax
debug isis
To disable debugging of IS-IS, use the no debug isis command.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
Entering debug isis enables all debugging parameters.
To display all debugging information in one output, use this command. To turn o debugging, you normally
enter separate no forms of each command. To disable all debug messages for IS-IS at once, enter the no
debug isis
command.
debug isis adj-packets
Enable debugging on adjacency-related activity such as hello packets that are sent and received on IS-IS adjacencies.
Syntax
debug isis [vrf vrf-name] adj-packets [interface]
Intermediate System to Intermediate System (IS-IS)
789