Service Manual
Valid MLD Packets 97962 18036
Reports 79962 18034
Leaves ---- 0
MLDv2 Queries 18000 ----
MLDv1 Queries 0 ----
Errors:
Malformed Packets: 4510
show ipv6 route
Displays the IPv6 routes.
Syntax
show ipv6 route [ipv6-address prefix-length] [vrf vrf-name] [hostname]
[all] [bgp as number] [connected] [isis tag] [list prefix-list name] [ospf
process-id] [rip] [static] [summary]
Parameters
ipv6-address prex-
length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prex length
in the /x format. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of the VRF to display IPv6
routes corresponding to that VRF.
NOTE: If you do not specify this option, routes corresponding to the
default VRF are displayed.
hostname (OPTIONAL) View information for this IPv6 routes with Host Name.
all (OPTIONAL) View information for all IPv6 routes.
bgp (OPTIONAL) View information for all IPv6 BGP routes.
connected (OPTIONAL) View only the directly connected IPv6 routes.
isis (OPTIONAL) View information for all IPv6 IS-IS routes.
list (OPTIONAL) View the IPv6 prex list.
ospf (OPTIONAL) View information for all IPv6 OSPF routes.
rip (OPTIONAL for E-Series only) View information for all IPv6 RIP routes.
static (OPTIONAL) View only routes congured by the ipv6 route command.
summary (OPTIONAL) View a brief list of the congured IPv6 routes.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
780
IPv6 Basics