Service Manual

Related Commands
format ash (S-Series) – Erases all the existing les and reformats the lesystem in the internal ash
memory on the S-Series.
show os-version
Display the release and software image version information of the image le specied.
Syntax
show os-version [file-url]
Parameters
le-url (OPTIONAL) Enter the following location keywords and information:
• For a le on the internal ash, enter flash:// followed by the lename.
• For a le on an FTP server, enter ftp://user:password@hostip/
filepath.
•
For a le on a TFTP server, enter tftp://hostip/filepath.
• For a le on the USB port, enter usbflash://filepath.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
NOTE: A lepath that contains a dot ( . ) is not supported.
File Management
73