Service Manual

delete
Delete a le from the ash. After deletion, les cannot be restored.
Syntax
delete flash-url [no-confirm]
Parameters
ash-url Enter the following location and keywords:
• For a le or directory on the internal Flash, enter flash:// followed by the
lename or directory name.
• For a le or directory on the NFS mounted le system, enter nfsmount://
followed by the mount point and the le path.
NOTE: While deleting a le directory on a remote NFS le system, it is
mandatory to specify the mount-point that indicates the working
directory on the NFS le system. You cannot delete the root directory
of the remote NFS le system.
• For a le or directory on an external USB drive, enter usbflash:// followed
by the lename or directory name.
no-conrm (OPTIONAL) Enter the keyword no-confirm to specify that Dell Networking OS
does not require user input for each le prior to deletion.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON. Added support for NFS mount.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
dir
Display the les in a le system. The default is the current directory.
Syntax
dir [filename | directory name:]
Parameters
lename | directory
name:
(OPTIONAL) Enter one of the following:
60
File Management