Service Manual
• show redundancy — displays the current redundancy conguration.
redundancy reset-counter
Reset failover counter and timestamp information displayed in the show redundancy command.
Syntax
redundancy reset-counter
Default Not congured.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the E-Series.
redundancy sfm standby
Place the SFM in an oine state.
Syntax
redundancy sfm standby
To place the SFM in an online state, use the no redundancy sfm standby command.
Default The SFM is online by default.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
High Availability (HA)
569