Service Manual
There is no need to reload or reboot the system when you insert the patch. The In-Service Modular patch
replaces the existing process code. After installation is complete, the system executes the patch code as
though it was always there.
Related Commands show patch — displays the system patches loaded with the in-service modular hot fix
command.
process restartable
Enable a process to be restarted. Restartability is subject to a maximum restart limit. This limit is dened as a congured number of
restarts within a congured amount of time. On the software exception that exceeds the limit, the system reloads (for systems with
a single RPM) or fails over (for systems with dual RPMs).
Syntax
process restartable [process] [count number] [period minutes]
Parameters
process Congure a process to be restartable.
count number Enter the number of times a process can restart within the congured period. The
range is from 1 to 3. The default is 3.
period minutes Enter the amount of time within which the process can restart count times. The
range is from 1 to 60 minutes. The default is 60 minutes.
Default By default, a process can be restarted a maximum of three times within one hour. On the exception that
exceeds this limit, the system reloads or fails over.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced on the E-Series.
Related Commands show processes restartable
564
High Availability (HA)