Service Manual

Version Description
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage Information
Fixed registration prevents an interface, congured using the command line, to belong to a VLAN (static
conguration) from being uncongured when it receives a Leave message. Therefore, Registration mode
on that interface is xed.
Normal registration is the default registration. The port’s membership in the VLAN depends on GVRP. The
interface becomes a member of a VLAN after learning about the VLAN through GVRP. If the VLAN is
removed from the port that sends GVRP advertisements to this device, the port stops being a member of
the VLAN.
To advertise or learn about VLANs through GVRP, use the forbidden command when you do not want
the interface.
Related Commands show gvrp — displays the GVRP conguration including the registration.
protocol gvrp
Access GVRP protocol — (cong-gvrp)#.
Syntax
protocol gvrp
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related Commands disable — globally disables GVRP.
558
GARP VLAN Registration (GVRP)