Service Manual

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on C-Series, E-Series, and S-Series

Related Commands disable — globally disables GVRP.

gvrp registration

Congure the GVRP register type.

Syntax

gvrp registration {fixed | normal | forbidden}

To return to the default, use the gvrp register normal command.

Parameters

xed Enter the keyword fixed then the VLAN range in a comma-separated VLAN ID

set.

normal Enter the keyword normal then the VLAN range in a comma-separated VLAN ID

set. This setting is the default.

forbidden Enter the keyword forbidden then the VLAN range in a comma-separated

VLAN ID set.

Defaults normal

Command Modes CONFIGURATION-INTERFACE

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.