Service Manual

Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
8.2.1.0 Introduced on the C-Series and S-Series.
Related Commands arp inspection — enables dynamic ARP inspection on a VLAN.
clear ip dhcp snooping
Clear the DHCP binding table.
Syntax
clear ip dhcp snooping {binding | source-address-validation discard-
counters [interface interface]}
Parameters
binding
Clears the binding table.
source-address-
validation discard-
counters
Clears discard counters from all the interfaces congured with IP Source Guard.
interface interface
(OPTIONAL) Species an interface to clear the discard counters.
Enter any of the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a port channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048–ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
506
Dynamic Host Conguration Protocol (DHCP)