Service Manual

Version Description
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
show ip dhcp conguration
Display the DHCP conguration.
Syntax
show ip dhcp configuration [global | pool name]
Parameters
pool name Display the conguration for a DHCP pool.
global Display the DHCP conguration for the entire system.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
show ip dhcp conict
Display the address conict log.
Syntax
show ip dhcp conflict address
Parameters
address Display a particular conict log entry.
Defaults none
Command Modes EXEC Privilege
Dynamic Host Conguration Protocol (DHCP)
503