Service Manual

MCAST 3 0
Unit 1 unit: 3 port: 29 (interface Fo 1/172)
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
MCAST 3 0
Unit 1 unit: 3 port: 33 (interface Fo 1/176)
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
MCAST 3 0
Unit 1 unit: 3 port: 37 (interface Fo 1/180)
---------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
---------------------------------------
show hardware system-ow
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow layer2 stack-unit id port-set number [counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe, display which system
ow entry the packet hits and what queue the packet takes as it dumps the raw
system ow tables.
stack-unit id Enter the keywords stack-unit to select a stack member ID. The range is from 1
to 6.
port-set number
[counters]
Enter the keywords port-set with a port-pipe number.
The range is from 0 to 0.
(OPTIONAL) Enter the keyword counters to display hit counters for the selected
ACL or QoS option.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Debugging and Diagnostics
487