Service Manual

Command History

Version Description

9.8(0.0) Added the keyword interface all. Introduced on the S4048–ON and S3048–

ON.

9.7(0.0) Introduced on the S6000-ON.

9.6(0.0) Introduced on the S5000.

9.3(0.0) Introduced on the S6000, S4810, and S4820T.

Usage Information

The following information is displayed based on the buer-info type, such as device-level details, queue-

based snapshots, or priority group-level snapshot in the egress and ingress direction of trac:

• Device-ingress – Displays total buer accounting usage for the unit.

• Device-egress –Display total buer usage for the unit, total multicast buer usage for the unit and also

on per-service-pool basis. Counters will be displayed for the 2 service-pools – one for normal trac and

other for DCB trac.

When the buer-stats-snapshot is disabled, the following informational message is displayed when you run

the show command: %Info: Buffer-stats-snapshot feature is disabled.

Example

Dell#show hardware stack-unit 1 buffer-stats-snapshot unit 3 resource

interface all queue mcast 3

Unit 1 unit: 3 port: 1 (interface Fo 1/144)

---------------------------------------