Service Manual

neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax
neighbor {ip-address | peer-group-name} advertisement-interval seconds
To return to the default value, use the no neighbor {ip-address | peer-group-name}
advertisement-interval command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group to set the advertisement interval for all routers in
the peer group.
seconds Enter a number as the time interval, in seconds, between BGP advertisements. The
range is from 0 to 600 seconds. The default is 5 seconds for internal BGP peers
and 30 seconds for external BGP peers.
Defaults
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
neighbor advertisement-start
To send BGP routing updates, set the minimum interval before starting.
Syntax
neighbor {ip-address} advertisement-start seconds
To return to the default value, use the no neighbor {ip-address} advertisement-start
command.
374
Border Gateway Protocol