Service Manual
When you change the path selection from Deterministic to Non-Deterministic, the path selection for the
existing paths remains Deterministic until you enter the clear ip bgp command to clear existing paths.
bgp recursive-bgp-next-hop
Enable next-hop resolution through other routes learned by BGP.
Syntax
bgp recursive-bgp-next-hop
To disable next-hop resolution, use the no bgp recursive-bgp-next-hop command.
Defaults Enabled
Command Modes ROUTER BGP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.2.1.0 Introduced.
Usage Information
This command is a knob to disable BGP next-hop resolution using BGP learned routes. During the next-hop
resolution, only the rst route that the next-hop resolves through is veried for the route’s protocol source
and is checked if the route is learned from BGP or not.
The clear ip bgp command is required for this command to take eect and to keep the BGP database
consistent. Execute the clear ip bgp command right after executing this command.
Related Commands clear ip bgp — clears the ip bgp.
bgp regex-eval-optz-disable
Disables the Regex Performance engine that optimizes complex regular expression with BGP.
Syntax
bgp regex-eval-optz-disable
To re-enable optimization engine, use the no bgp regex-eval-optz-disable command.
Border Gateway Protocol
355