Service Manual

Parameters
group-name Enter the name of the ACL VLAN group where you want the egress IP ACLs
applied, up to 140 characters.
out Enter the keyword out to apply the ACL to outgoing trac.
implicit-permit
Enter the keyword implicit-permit to change the default action of the ACL
from implicit-deny to implicit-permit (that is, if the trac does not match the lters
in the ACL, the trac is permitted instead of dropped).
Default None
Command Modes CONFIGURATION (conf-acl-vl-grp)
Command History
Version 9.3.(0.0) Introduced on the S4810, S4820T, and Z9000 platforms.
Usage Information You can apply only an egress IP ACL on an ACL VLAN group.
show acl-vlan-group
Display all the ACL VLAN groups or display a specic ACL VLAN group, identied by name.
Syntax
show acl-vlan-group {group-name | detail}
Parameters
group-name (Optional) Display only the ACL VLAN group that is specied, up to 140 characters.
detail
Display information in a line-by-line format to display the names in their entirety.
Without the detail option, the output displays in a table style and information may
be truncated.
Default No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms
Usage Information When an ACL-VLAN-Group name or the Access List Group Name contains more than 30 characters, the
name is truncated in the show acl-vlan-group command output.
Examples The following sample illustrates the output of the show acl-vlan-group command.
NOTE: Some group names and some access list names are truncated.
Dell#show running-config acl-vlan-group
!
acl-vlan-group Test
member vlan 1-100
ip access-group test in
Dell#show acl-vlan-group
Group Name Egress IP Acl Ingress IP Acl Ingress V6 Acl
312
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)