Service Manual
Parameters
backbone Enter the keyword backbone to redistribute matched routes to the OSPF
backbone area (area 0.0.0.0).
level-1 Enter the keyword level-1 to redistribute matched routes to IS-IS Level 1.
level-1-2 Enter the keyword level-1-2 to redistribute matched routes to IS-IS Level 1 and
Level 2.
level-2 Enter the keyword level-2 to redistribute matched routes to IS-IS Level 2.
stub-area Enter the keyword stub to redistributed matched routes to OSPF stub areas.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Dell Networking OS Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related Commands
set automatic-tag — computes the tag value of the route.
set metric — species the metric value assigned to redistributed routes.
set metric-type — species the metric type assigned to redistributed routes.
set tag — species the tag assigned to redistributed routes.
set local-preference
To set the BGP LOCAL_PREF attribute for routers within the local autonomous system, congure a lter.
Syntax
set local-preference value
To delete a BGP LOCAL_PREF attribute, use the no set local-preference command.
260
Access Control Lists (ACL)