Service Manual

no-advertise Enter the keywords no-advertise to drop all routes containing the well-known
community attribute of NO_ADVERTISE.
All routes with the NO_ADVERTISE (0xFFFFFF02) community attribute must not
be advertised to other BGP peers.
no-export Enter the keywords no-export to drop all routes containing the well-known
community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community attribute must not be
advertised outside a BGP confederation boundary.
none Enter the keyword none to remove the community attribute from routes meeting
the route map criteria.
additive (OPTIONAL) Enter the keyword additive to add the communities to already
existing communities.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related Commands
match community — redistributes routes that match the COMMUNITY attribute.
set level
To specify the IS-IS level or OSPF area to which matched routes are redistributed, congure a lter.
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
To remove a set level condition, use the no set level {backbone | level-1 | level-1-2 |
level-2 | stub-area} command.
Access Control Lists (ACL)
259