Service Manual

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names
are up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
The community list used in the set comm-list delete command must be congured so that each
lter contains only one community. For example, the lter deny 100:12 is acceptable, but the lter deny
120:13 140:33
results in an error.
If the set comm-list delete command and the set community command are congured in the
same route map sequence, the deletion command (
set comm-list delete) is processed before the
insertion command (set community).
Related Commands
match community — redistributes routes that match the COMMUNITY attribute.
set community — species a COMMUNITY attribute.
set community
Allows you to assign a BGP COMMUNITY attribute.
Syntax
set community {community-number | local-as | no-advertise | no-export |
none} [additive]
To delete a BGP COMMUNITY attribute assignment, use the no set community {community-
number | local-as | no-advertise | no-export | none} command.
Parameters
community-number Enter the community number in AA:NN format where AA is the AS number (2
bytes) and NN is a value specic to that autonomous system.
local-AS Enter the keywords local-AS to drop all routes with the COMMUNITY attribute
of NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03) community
attribute must not be advertised to external BGP peers.
258
Access Control Lists (ACL)