Service Manual

Example
Dell(conf)#route-map dempsey
Dell(config-route-map)#
Related Commands show cong — displays the current conguration.
set as-path
To modify the AS path for border gateway protocol (BGP) routes, congure a lter.
Syntax
set as-path prepend as-number [... as-number]
To remove an AS-Path setting, use the no set as-path {prepend as-number | tag} command.
Parameters
prepend as-number Enter the keyword prepend and then enter up to eight AS numbers to be inserted
into the BGP path information. The range is from 1 to 65535.
Defaults Not congured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information
You can prepend up to eight AS numbers to a BGP route.
This command inuences best path selection in BGP by inserting a tag or AS number into the AS_PATH
attribute.
Related Commands
match as-path — redistributes routes that match an AS-PATH attribute.
set automatic-tag
To automatically compute the tag value of the route, congure a lter.
Syntax
set automatic-tag
256
Access Control Lists (ACL)