Service Manual

• If a set action occurs in the rst route map entry and then the same set action occurs with a dierent
value in a subsequent route map entry, the last set of actions overrides the previous set of actions with
the same set command.
• If set community additive and set as-path prepend are congure, the communities and
AS numbers are prepended.
Related Commands
set community — species a COMMUNITY attribute.
set as-path — congures a lter to modify the AS path.
description
Add a description to this route map.
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description Enter a description to identify the route map (80 characters maximum).
Defaults none
Command Modes ROUTE-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
pre-7.7.1.0 Introduced.
Related Commands route-map — enables a route map.
match as-path
To match routes that have a certain AS number in their BGP path, congure a lter.
Syntax
match as-path as-path-name
To delete a match AS path lter, use the no match as-path as-path-name command.
Parameters
as-path-name Enter the name of an established AS-PATH ACL, up to 140 characters.
Access Control Lists (ACL)
245