Service Manual

le max-prex-length (OPTIONAL) Enter the keyword le and then enter the maximum prex length,
which is a number from zero (0) to 32.
Defaults Not congured.
Command Modes PREFIX-LIST
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information
Sequence numbers for this lter are automatically assigned starting at sequence number 5.
If you do not use the ge or le options, only packets with an exact match to the prex are ltered.
ip prex-list
Enter the PREFIX-LIST mode and congure a prex list.
Syntax
ip prefix-list prefix-name
To delete a prex list, use the no ip prefix-list prefix-name command.
Parameters
prex-name Enter a string up to 16 characters long as the name of the prex list, up to 140
characters long.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
Access Control Lists (ACL)
239