Service Manual

clear ip prex-list
Reset the number of times trac mets the conditions (“hit” counters) of the congured prex lists.
Syntax
clear ip prefix-list [prefix-name]
Parameters
prex-name (OPTIONAL) Enter the name of the congured prex list to clear only counters for
that prex list, up to 140 characters long.
Defaults Clears “hit” counters for all prex lists unless a prex list is specied.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increase the name string to accept up to 140 characters. Prior to 7.8.1.0, names
were up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related Commands ip prex-list — congures a prex list.
deny
To drop packets meeting the criteria specied, congure a lter.
Syntax
deny ip-prefix [ge min-prefix-length] [le max-prefix-length]
To delete a drop lter, use the no deny ip-prefix command.
Parameters
ip-prex Specify an IP prex in the network/length format. For example, 35.0.0.0/ 8 means
match the rst 8 bits of address 35.0.0.0.
ge min-prex-
length
(OPTIONAL) Enter the keyword ge and then enter the minimum prex length,
which is a number from zero (0) to 32.
238
Access Control Lists (ACL)