Service Manual

show vlt counters
Displays the counter information.
Syntax
show vlt counters [arp| igmp-snoop | interface | mac | ndp]
Parameters
arp Enter the keyword arp to display the ARP counter information for the VLT.
igmp-snoop Enter the keywords igmp-snoop to display the igmp-snooping counter
information for the VLT.
interface Enter the keyword interface to display the interface counter information for the
VLT.
mac Enter the keyword mac to display the MAC address counter information for the
VLT.
ndp Enter the keyword ndp to display the VLT counter information for NDP.
Default Not congured.
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information If you do not add a parameter such as arp or mac, the output displays all of the counters.
Example
Dell# show vlt counter
Total VLT counters
-------------------------
L2 Total MAC-Address Count :
IGMP MRouter Vlans count :
IGMP Mcast Groups count :
ARP entries count :
Example (igmp-
snoop)
Dell# show vlt counter igmp-snoop
Total IGMP VLT counters
----------------------
IGMP MRouter Vlans count : 1
IGMP Mcast Groups count : 5
Example (igmp-
snoop interface
port-channel)
Dell#show vlt counter igmp-snoop interface port-channel 2
VLT Port-ID: 2 IGMP Counter
-----------------------
Virtual Link Trunking (VLT)
1507